REGENMASTER: ENERGY RECOVERY FOR LIFTS

A RegenMaster can be installed on almost any geared/gearless traction elevator with no existing regenerative system. If the VF inverter has a brake resistor then there is no problem. If you are not sure please do not hesitate to contact us. We have an extensive list of compatible previously implemented regenerative drives. Here is just a sample:

• Ziehl Abegg

• Control Techniques (Nidec)

• Fuji

• Lenze

• Omron

• SEW

• Vacon

• Yaskawa

• Danfoss

• Arkel

No, the unit is simply wired into the DC bus on the VF inverter and requires no need to interface with the existing controller. As this is not a safety component, no additional Notified Body visits are required.

Savings of up to 70% are achievable. This will depend on the type of existing elevator, trips per day, duty load and speed. We are more than willing to offer you a specific calculation for your elevator. In addition to all of this, the RegenMaster assists the global Net Zero pledge for a greener future for us all. The RegenMaster is also made respectfully to the environment by not using any harmful materials.

The RegenMaster creates of 360 kilograms of CO2 during its lifespan and manufacturing. As soon as it is able to save 743 kilowatt hours (kWh) of electricity in the operation of the lift, it has already offset its own carbon footprint.

Due to its compact design, practically no maintenance is required. As with any electrical component, we ask that it is kept dust free to ensure a correct operation.

Typically a low traffic lift may have 80% of its power being used during standby mode. The RegenMaster will automatically use its stored energy to power the elevator during its standby mode. The RegenMaster consumes less than 3w during standby mode.

Click the following link to download the brochure: